Press and hold the number button (in this example, 1) for more than 2 seconds.
Tuning into a preset station
You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see �Storing stations in memory� on page 8.
1
�P1� flashes for a few seconds.
Select the band (FM1 � 3, AM).
FM1 FM2 FM3
4
Repeat the above procedure to store other stations into other preset numbers.
AM
2
Select the number (1 � 6) for the preset station you want.
Notes: � A previously preset station is erased when a new station is stored in the same preset number. � Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.
Scanning broadcast stations
When you press RPT/SCAN (for KS-FX202) or SCAN (for KS-F162) while listening to the (For KS-FX202) radio, station scanning start. Each time a broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes on the display), and you can check what (For KS-F162) program is now being broadcast. If you want to listen to that program, press the same button again to stop scanning.