KS-FX201
Removing the Heat Sink ( See Fig. 5 )
1. Removing the front chassis. 2. Removing the bottom cover. 3. Remove the three screws ( 1 and 1' ) retaining the heat sink.
1 1
Heat sink
1'
Fig. 5
Removing the Main Board Assembly ( See Fig. 5 to 7)
1. Removing the front chassis. 2. Removing the bottom cover. 3. Removing the heat sink. Attach the heat sink with a screw ( 1' ) on operating checks.
2
(
)
4. Remove the two screws ( 2 ) retaining the main board assembly. 5. Remove the six screws ( 3 ) and one screw ( 3' ) retaining the rear panel. 6. Separate the main board assembly and cassette mechanism assembly. 7. Take out the main board assembly.
2
