AEG ÖKO_S.S2573-4KA
Manual de Usuario

4.

Remove the centre hinge and slide the top door off pin (D); unscrew pin (D) and refit it on the opposite side. Remove the two plugs, to reveal the holes for the hinge pivots, and remount them on the other side. Refit the top door and the centre hinge (H) on the opposite side. Refit the bottom door. Refit bottom hinge (E) on the opposite side, using the two screws previously removed. Remove blanking cover (F) from ventilation grille (D) by pushing it in the direction of the arrow and refit it on the opposite side. Refit ventilation grille (D), clipping it into place. Unscrew the handle. Refit it on opposite side after having pierced the plugs with a punch. Cover the holes left open with the plugs contained in the documentation pack. Attention: After having reversed the opening direction of the doors check that all the screws are properly tightened and that the magnetic seal adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. in that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.
D590

5.

D

6. 7. 8.

9.

H

10. 11.

PR24

PR228

9