BLOMBERG KI1231
Manual de Usuario

Tür öffnen und Gerät an die linke Möbelseitenwand rücken. Gerät mit den 4 beiliegenden Schrauben befestigen. Belüftungsgitter (C) und Scharnierabdeckung (D) aufstecken.
D C
D727

Should the lining up of the furniture door be necessary, use the clearance of slots. At the end of operations, it is necessary to check if the door of the furniture closes properly.

PR168

In die Befestigungs und Scharnierlöcher beiliegende Abdeckkappen (B) einsetzen.

Fix cover (D) on guide (B) until it clips into place.

B

B
D
D726
PR167/1

Die Teile A, B, C, D abnehmen, wie in der Abb. gezeigt wird.

A

B

Prior to Initial Start�Up
C D
PR266

�

Please clean the appliance interior and all accessories prior to initial start-up (see section: �Cleaning and Care�).

Green and Yellow Earth Blue Neutral Brown Live As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings indentifying the terminals in your plug, proceed as follows: 1. The wire coloured green and yellow must be connected to the terminal marked with the letter �E� or by the earth symbol or coloured green and yellow. 2. The wire coloured blue must be connected to the terminal �N� or coloured black. 3. The wire coloured brown must be connected to the terminal marked �L� or coloured red. 4. Upon completion there must be not cut, or stray strands of wire present and the cord clamp must be secure over the outer sheat. Warning! A cut-off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut-off plug is disposed of safely.

Electrical Connection
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

50mm

Die Schiene (A) auf der Innenseite der Möbeltür oben und unten auflegen (siehe Abb.) und die Position der äu�eren Bohrlöcher anzeichnen. Nachdem die Löcher gebohrt wurden, die Schiene mit den mitgelieferten Schrauben befestigen.

A

WARNING � THIS APPLIANCE MUST BE EARTHED The manufacturer declines any liability should these safety measures not be observed.
20 mm

PR166

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is inside, on the left. The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used. Important! The wires in the mains lead are coloured in accordance with the following code:

Die Abdeckung (C) in die Schiene (A) eindrücken, bis sie einrastet.
A

C
PR33

6

19