PIONEER KEH-2031/XM/EE
Manual de Usuario

Section

HHHHHHHHHHHHHH Audio Adjustments

06

Adjusting BTB
You can adjust the currently selected BTB setting as desired. Adjusted BTB settings are memorized in CUSTOM.

# To turn loudness off, press VOLUME down/.

Adjusting bass
You can adjust the bass level. 1 Press AUDIO to select BAS. Press AUDIO until BAS appears in the display. 2 Press VOLUME up/+ or down/ to adjust the bass level. Each press of VOLUME up/+ or down/ increases or decreases the bass level. +6  6 is displayed as the level is increased or decreased.

3 Press c or d to select a desired level. Each press of c or d selects level in the following order: LOW (low)HI (high)
Note You can also turn loudness on or off by pressing LOUDNESS.

Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the volume level of the FM tuner, which remains unchanged. 1 Compare the FM tuner volume level with the level of the source you wish to adjust. 2 Press AUDIO to select SLA. Press AUDIO until SLA appears in the display. 3 Press VOLUME up/+ or down/ to adjust the source volume. Each press of VOLUME up/+ or down/ increases or decreases the source volume. SLA +4  SLA 4 is displayed as the source volume is increased or decreased.
Notes ! Since the FM tuner volume is the control, it is not possible to apply source level adjustments to the FM tuner. ! The MW/LW tuner volume level can also be adjusted with source level adjustments.

Adjusting treble
You can adjust the treble level. 1 Press AUDIO to select TRE. Press AUDIO until TRE appears in the display. 2 Press VOLUME up/+ or down/ to adjust the treble level. Each press of VOLUME up/+ or down/ increases or decreases the treble level. +6  6 is displayed as the level is increased or decreased.

Adjusting loudness
Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Press AUDIO to select LOUD. Press AUDIO until LOUD appears in the display. 2 Press VOLUME up/+ to turn loudness on. LOUD indicator is displayed.

10

En