KD-LH7R
Removing the MP3 board (See Fig.9)
Prior to performing the following procedure, remove the top cover. 1. Disconnect the wire from connector CN601 on the MP3 board. 2. Remove the five screws G releasing the joint g and h. and the MP3 board,
G
g
h
CN601
G
Fig.9
Removing the CD mechanism assembly (See Fig.10)
Prior to performing the following procedure, remove the front chassis, the heat sink, bottom cover and the main amplifier board assembly. 1. Remove the three screws H attaching the cassette mechanism assembly from the top cover.
