Clear loading/ejection error history : The error history stored in the EEPROM is cleared (by writing 00h).
Press the [DISC UP] or [DISC DW] key
"READ CH-ERROR" is indicated on the LCD.
Press the [SEL] key
Read changer error history : The error history saved in the CD changer is read out (provided that the data is returned in less than 2 seconds after connection to 93 address).
Press the [DISC UP] or [DISC DW] key
"CLEAR CH-ERROR" is indicated on the LCD.
Press the [SEL] key
Clear changer error history : The error history saved in the CD changer is cleared.
Press the [DISC UP] or [DISC DW] key
"INITIALIZE" is indicated on the LCD.
Press the [SEL] key
Initialize user set data : The system control EEPROM is initialized except for the loading/ejection error history.
Press the [DISC UP] or [DISC DW] key
"INITIALIZE ALL" is indicated on the LCD.
Press the [SEL] key
Initialize all data to the factory setting : The system control EEPROM is initialized entirely.
Press the [DISC UP] or [DISC DW] key
"MEMORY CHECK" is indicated on the LCD.
Press the [SEL] key
Memory check : The remaining data capacity of the disc is displayed on the LCD.
