JVC KD-AR770J
Manual de Usuario

Indication, [Range]

General settings � PSM
You can change PSM (Preferred Setting Mode) items (except �SID�) listed in the table that follows.

ENGLISH

[�06 to +06] Adjust the bass. TRE*1 (treble), [�06 to +06] Adjust the treble. FAD*2 (fader), [R06 to F06] Adjust the front and rear speaker balance. BAL*3 (balance), [L06 to R06] Adjust the left and right speaker balance. LOUD*1 (loudness), [LOUD ON or LOUD OFF] Boost low and high frequencies to produce a well-balanced sound at low volume level. SUB. W*4 (subwoofer), [00 to 08] Adjust the subwoofer output level. VOL (volume), [00 to 30 or 50*5] Adjust the volume. *1 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including �USER.� *2 If you are using a two-speaker system, set the fader level to �00.� *3 This adjustment cannot affect the subwoofer output. *4 This takes effect only when a subwoofer is connected. *5 Depending on the amplifier gain control setting. (See page 16 for details.)

BAS*1 (bass),

1 2
Select a PSM item.

Ex.: When you select �DIMMER�

3

Adjust the PSM item selected.

4 5

Repeat steps 2 and 3 to adjust the other PSM items if necessary. Finish the procedure.

14