|
No hay comentarios de productos.
3.1.4 Removing the side panel (See Fig.4) � Prior to performing the following procedure, remove the front panel assembly as required. (1) Remove the screw B and two screws C attaching the heat sink on the left side of the main body, and remove the side panel.
C
B
C
Side panel
Fig.4 3.1.5 Removing the rear bracket (See Fig.5) � Prior to performing the following procedure, remove the bottom cover. (1) Remove the three screws D, three screws E and two screws F attaching the rear bracket on the back side of the main body. (2) Remove the rear bracket.
E
F
Rear bracket
E
F
D
Fig.5 3.1.6 Removing the main board (See Fig.6) � Prior to performing the following procedure, remove the front panel assembly, front chassis assembly, side panel, bottom cover and rear bracket. (1) Remove the two screws G attaching the main board. (2) Disconnect the connector CN501 and remove the main board.
D
Main board CN501
G
G
Fig.6
(No.MA030)1-7
|
