WHIRLPOOL JDB6900AWW
Manual de Usuario

Options
Options
Sani Clean Option The Sani Clean option may be used with the Pots & Pans, Normal and Light/China cycles to provide a higher temperature rinse and to boost drying results. When Sani Clean is selected, the cycle may be extended until proper water temperature is achieved, When the cycle is being extend for water heating, the HEATING DELAY light is illuminated,

JDB4950,
Indicator
_

JDB5900

Lights

Delay Start glows when this option is selected. The light stays on until the start of the cycle.

_

Clean (certain models) glows at the end of the dry cycle and remains lit until the control knob has been manually advanced to OFF.

a_k

q|_Heating Delay glows to indicate that the cycle is being extended to heat water to the proper temperature.

_,

Pots & Pans Option The Pots & Pans option checks the main wash temperature early in the cycle. If necessary, the cycle is extended until a proper water temperature is reached. When the cycle is being extended, the HEATING DELAY light is illuminated. Use this option to aid in the removal of tough, more difficult to remove food soils (such as starches and fats).

_k

AccuTemp'" Option (JDB5900 only) The AccuTemp '_ option checks the main wash temperature during the later portion of the cycle. If necessary, the cycle is extended until a proper water temperature is reached. When the cycle is being extended. the HEATING DELAY light is illuminated. Use this option to assure that the water is hot enough to activate detergent and break down greasy food soils. Heated Dry Option Heated Dry ON improves drying results by turning on the heating element during the dry portion of the cycle. Heated Dry OFF turns the heating element off during the dry portion of the cycle. Towel drying of some items may necessary with this selection and more moisture may be noticed on the dishwasher interior.

Note: With either dry option, it is normal to notice vapor coming out of the vent area.