AIWA HV-FX8700
Manual de Servicio

DISASSEMBLY INSTRUCTION
1. How to Remove the JOG/SHUTTLE 3. Caution When Attaching the Mechanism

SERVICE POSITION
The washers that fix the MAIN C.B., are prepared to be used for service, for the purpose that the mechanism can be easily set in the service position while the main power of the machine is turned on. Attach the four washers to the four feet of the mechanism. (See the illustration below.)
Washers

Mechanism
Rear

MAIN C.B

Wrap a tape around the JOG/SHUTTLE and remove it. 2. How to Remove the Mechanism NOTE:Adjust switching position after reassembling mechanism assy.
Lock lever

MAIN C.B

Mechanism

Front

Be careful when attaching the MAIN C.B. to mechanism that the leg leads of the erase head must be correctly inserted.

This model has the structure that the MAIN, TU and PS C.B. are removed together with the rear panel when the rear panel is removed. At the same time, be careful not to touch the power supply block during repair work. Part No. 87-067-505-010 PW, 2.5-6-0.5 SLT

Slide the cassette holder (as shown in the illustration), and remove the three screws fixing the MAIN BASE of the mechanism deck.

Be careful when attaching the MAIN C.B. to mechanism that the marked position of the rotary switch on the MAIN C.B. must agree with the corresponding marking on the MAIN C.B. (See the above illustration.)

Raise the mechanism deck and remove it. Note: Never hold the TOP BRACKET of the mechanism.

�4�