DVD Setup Menu Options (continued)
Accessing Audio Setup Page 1 Press DISC and followed by SETUP on
the remote. CD Upsampling This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. Make sure that the DVD system is in Stereo mode in order to access the CD upsampling option.
Audio Setup Page Speakers Volume Speakers Delay Night Mode CD Upsampling
2 Use 1 2 keys to select �Audio Setup
Page�.
3 Press OK to confirm.
1 In �Audio Setup Page�, use 34 keys to
2. { Off }
Select this to disable CD-upsampling.
highlight { CD Upsampling }, then press
{ 88.2 kHz (X2) }
Select this to convert the sampling rate of the CDs twice higher than the original.
Speakers Volume/Speakers Delay These menus contain speaker setup options that allow you to adjust the individual speakers volume and distance. For details, see page 40. Night Mode - turning on/off When the night mode is activated, the high volume outputs are softened and low volume outputs are brought upward to an audible level. It is useful for watching action movies without disturbing others at night.
2 Use 34 keys to select a setting and press
OK to confirm. Helpful Hint: � If you press SURR button on the remote control to select �Multi-Channel� mode, it will disable the CD upsampling feature.
1 In �Audio Setup Page�, use 34 keys to
highlight { Night Mode }, then press 2. { On }
Select this to level out the volume.
{ Off }
Select this when you want to enjoy the surround sound with its full dynamic range.
2 Use 34 keys to select a setting and press
OK to confirm.
TIPS:
The underlined option is the factory default setting. To return to the previous menu, press 1. To remove the menu, press SETUP.
