AIWA HTDV90
Manual de Servicio

� L&R: Front speakers � C: Center speaker Place it in the center of the two front speakers, possibly on or below the TV set. � LS&RS: Surround speakers Place them directly to the side of or slightly behind the listening area. Align them horizontally , preferably 0.6 to 1 meter above ear height. � SW: Subwoofer Place it anywhere between the two front speakers. NOTE � Do not place the left and right front speakers close to the TV set, as doing so may cause picture noise. � Sound output from the center and surround speakers is only available when the surround ef fect (Dolby Surround or DTS Surround etc.,) is activated with the appropriate setting. � To mount the front and surround speakers on the wall, see �MOUNTING THE FRONT AND SURROUND SPEAKERS�, page 8. 2 Connect the speakers. � The black-colored cord goes to the 9 terminals and the other cord goes to the 0 terminals.

3 Connect the supplied antennas.
Connect the FM antenna to the FM 75 � (COAXIAL) jack and the AM antenna to the AM LOOP terminal.

FM antenna AM antenna

The black-colored cord goes to the

2 terminal.

4 Connect the power supply.
Plug in the AC power cord of this unit to a wall outlet. NOTE � Do not leave objects generating magnetism, such as credit cards, near the speakers, as the objects may be damaged. � Do not bring the FM antenna near metal objects or curtain rails. � Do not bring the AM antenna near other optional equipment, the stereo system itself, the AC cord or speaker cords, since noise will be picked up. � Do not unwind the AM antenna wire.

Connecting the speaker cord to the terminals
� Connect the cords to the corresponding speakers. Hold down the lever to insert the cord, then release. � Connect the cord from the right front speaker to the FRONT SPEAKERS R terminals, and the cord from the left front speaker to the FRONT SPEAKERS L terminals. � Connect the cord from the right surround speaker to the SURROUND SPEAKERS RS terminals, and the cord from the left surround speaker to the SURROUND SPEAKERS LS terminals. � Connect the cord from the center speaker to the CENTER SPEAKER terminals. � Connect the cord from the subwoofer to the SUB WOOFER terminals. NOTE � Connect the speaker cords securely to the terminals. Improper connection may cause a short circuit. � When connecting the speakers that are not supplied, confirm the speaker impedance and the speaker setting of this unit (page 25).

6 ENGLISH