JVC HR-VP436U
Manual de Usuario

33

Recording
V T V I D E O
2 2

Record One Program While Watching Another

ENGAGE TV MODE

1
q 5/8 6

During recording... � If using the RF connection ( pg. 6), press TV/VIDEO. The VCR's VIDEO indicator goes out and the TV broadcast being recorded disappears. � If using the AV connection ( pg. 6), change the TV's input mode from AV to TV.

SELECT CHANNEL FOR VIEWING

2
OSD
1 4 7 2 5 8 0 3 6 9

Use the TV�s channel selector to set the channel you want to watch.

Display Elapsed Recording Time

RESET COUNTER TO ZERO
Before recording starts, press C.RESET. The counter

1
/

C.RESET

resets to zero and displays the exact elapsed time as the tape runs.

DISPLAY ELAPSED TIME ON SCREEN

2

During recording, press OSD at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press OSD again to remove the display. � Make sure "SUPERIMPOSE" is set to "ON" ( pg. 26).