JVC HR-S6953EU
Manual de Usuario

16 EN

SAT CONTROL SET (cont.)

C Access the Initial Set screen.
Press rt to move the highlight bar (pointer) to �INITIAL SET�, then press OK or e.

D Access the Sat Control Set screen.
Press rt to move the highlight bar (pointer) to �SAT CONTROL SET�, then press OK or e.

E Enter the satellite receiver�s brand.
� If the brand code you entered is invalid, the code field will be reset. Enter the correct brand code again. � If the recorder is in playback or recording mode, you cannot set the brand code.

Press the appropriate number keys to enter the brand code from the list on page 17, then press OK.

F Select the satellite receiver�s channel for
testing.
Press the appropriate number keys to enter one of the channel positions on the satellite receiver, then press OK.

Setting satellite receiver's brand and channel
After installation, set the satellite receiver�s brand and channel correctly; otherwise, the Satellite Controller cannot work correctly. Turn on the TV and select the video channel (or AV mode).

� You can select the channel position between 1 to 999. � After pressing OK, the recorder enters the Test mode.

A Turn on the satellite receiver.
Turn on the satellite receiver�s power.

B Access the Main Menu screen on the
recorder.
Press MENU.