JVC HR-S2912UC
Manual de Usuario

Editing
You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components� instruction manuals for connection and its operations.

Example 3: When another VCR is S-VHS VCR and when using this VCR as the recording VCR
This VCR (for recording) To AUDIO input To S-VIDEO input

A Make connections
Example 1: When another VCR is VHS VCR
This VCR To AUDIO/VIDEO IN To AUDIO/VIDEO OUT Audio cable (not supplied) S-video cable (not supplied)

When using this VCR as the recording VCR, connect this VCR�s AUDIO/VIDEO IN connectors to the audio/video output connectors on another VCR.

When using this VCR as the playback VCR, connect this VCR�s AUDIO/VIDEO OUT connectors to the audio/video input connectors on another VCR.

To audio output

To S-video output

Another VCR (for playback)

B Load cassettes
Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR.
To audio/video output Another VCR To audio/video input

C Select input mode on recording VCR
Select the correct external input on the recording VCR. On this VCR (when using this VCR as the recording VCR); Select �F-1� � when connecting the other VCR to the audio/video input connectors on the front panel. Press AUX or CHr/t on the Remote. Or on the VCR, press PAUSE[CH], and then FF[CH+] or REW[CH�]. See step 2 in �Basic Recording� ( pg. 9).

� If another VCR is monaural, connect this VCR�s AUDIO L IN (or OUT) connector to the audio output (or input) connector on another VCR. Example 2: When another VCR is S-VHS VCR and equipped with S-VIDEO input connector.
This VCR (for playback) To AUDIO OUT To S-VIDEO OUT

D Select video input connector on recording VCR
When using this VCR as the recording VCR, select the appropriate mode ( pg. 12). When using S-VIDEO input connector on the front panel, set �FRONT AUX INPUT� to �S-VIDEO�. When using VIDEO input connector on the front panel, set �FRONT AUX INPUT� to �VIDEO�.

E Select edit mode
Audio cable (not supplied) S-video cable (not supplied)

Set the edit mode to �ON� for the VCRs if such a mode is equipped. � On this VCR, set �PICTURE CONTROL� to �EDIT� ( pg. 11).

F Start playback
Press PLAY (4) on the playback VCR.

G Start recording
Press REC (7) on the recording VCR.
To video input To S-video input

Various connection for editing tapes
The following three methods can be used for editing tapes. � VHS to S-VHS editing (VIDEO-VIDEO connection): Although the picture quality is inherently limited by the original VHS quality, the edited tape has better picture quality than those made by VHS-to-VHS editing. � S-VHS to VHS editing (VIDEO-VIDEO connection): Since the original source is recorded in S-VHS mode, the edited tape has better picture quality than those made by VHS-to-VHS editing. � S-VHS to S-VHS (S-VIDEO connection): Original picture quality of S-VHS made can be duplicated with minimal picture degradation. This is the best editing method you can use on S-VHS VCRs.

Another VCR (for recording)

� 13 �