JVC HR-J870EU
Manual de Usuario

26 EN

TIMER RECORDING
®
You can use the on-screen display to enter the SHOWVIEW number.

SHOWVIEW Timer Programming
Before performing the SHOWVIEW Timer Programming:
� Make sure that the recorder�s built-in clock is set properly. � Insert a cassette with the safety tab in place. The recorder will come on automatically. � Turn on the TV and select the video channel (or AV mode).

A Access the SHOWVIEW screen.
Press PROG.

The front display panel looks like this:

LCD panel

B Enter the SHOWVIEW number.
Press the number keys to enter the SHOWVIEW number of a programme you wish to record. Then press OK.
� If you make a mistake, press & and input the correct number.

The SHOWVIEW number you enter appears on the front display panel with only a 4-digit number:

With the SHOWVIEW system, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognize. You can use the remote control with LCD panel to enter the SHOWVIEW number.

C Access the SHOWVIEW Program screen.
The SHOWVIEW Program screen appears (if you�re just starting out, �P1� appears).

A Access the SHOWVIEW display.
Press LCD PROG.
The LCD panel looks like this: The front display panel shows the programme start time. Pressing " changes the display to the programme stop time, then the date and channel position.

B Enter the SHOWVIEW number.
Press the number keys to enter the SHOWVIEW number of a programme you wish to record. Then press .
� If you make a mistake, press & and input the correct number. The SHOWVIEW number you enter appears on the LCD panel:

IMPORTANT
Make sure the channel position number you wish to record is displayed; if not, see �SHOWVIEW System Setup� on page 67 and set the Guide Program number correctly.
®

Then go to step 3 in the right column.

� If the number you entered is invalid, �ERROR� appears on the TV screen and �Err� appears on the front display panel. Press & and input a valid SHOWVIEW number. � If the �GUIDE PROG SET� screen appears, see �ATTENTION� on page 27.