JVC HR-J452EN
Manual de Usuario

EN

23

Recording Features
S D O

Record One Program While Watching Another

1

During recording... � Press TV/VCR. The VCR�s VCR indicator goes out. (If you are using the RF connection ( pg. 4) to view the output from your VCR, the TV broadcast being recorded disappears.) � If you are using the AV connection ( pg. 4) to view the output from your VCR, change the TV�s input mode from AV to TV.

ENGAGE TV MODE

1

1 7 4

2 5 8 0

3 6 9
2

SELECT CHANNEL FOR VIEWING

2

TV/VCR

Use the TV�s channel selector to set the channel you want to watch.

4

C.RESET

Display Elapsed Recording Time
�� ��

1
3

Before recording starts, press C.RESET. The counter resets to zero and displays the exact elapsed time as the tape runs.

RESET COUNTER TO ZERO

2

During recording, press OSD at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press OSD again to remove the display. � Make sure �SUPERIMPOSE� is set to �ON� ( 19). � The indications are not recorded. pg.

DISPLAY ELAPSED TIME ON SCREEN