JVC HR-J4406UM
Manual de Usuario

22 EN

PLAYBACK AND RECORDING FEATURES (cont.)
Record One Program While Watching Another

Recording Features
� �:� � TV/VCR

1

During recording... � Press TV/VCR. The VCR's VCR indicator goes out. (If you are using the RF connection ( pg. 4) to view the output from your VCR, the TV broadcast being recorded disappears.) � If you are using the AV connection ( pg. 4) to view the output from your VCR, change the TV's input mode from AV to TV.

ENGAGE TV MODE

SELECT CHANNEL FOR VIEWING
Use the TV�s channel selector to set the channel you

1 4 7
0000

2 5 8 0

3 6 9
4 2

2

want to watch.

1

Display Elapsed Recording Time

1
3

Before recording starts, press 0000. The counter resets to zero and displays the exact elapsed time as the tape runs.

RESET COUNTER TO ZERO

2

During recording, press � �:� � at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press � �:� � again to remove the display.

DISPLAY ELAPSED TIME ON SCREEN

� Make sure "SUPERIMPOSE" is set to "ON" ( pg. 18). � The indications are not recorded. � Each time you press � �:� �, the indication on the front display panel will also change as follows: counter reading = channel number = clock time. (Channel number is not displayed during playback.)