|
Usuarios conectados
Actualmente hay 5049 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
23
U M
SELECT PROGRAM NUMBER
" 8
3
2 3
Press the appropriate NUMBER keys or CH5� to select a vacant program number, then press OK. The first time you do this, all numbers will be vacant, so just press OK when the screen appears.
O
C H T
q
5/8
6
SET PROGRAM INFORMATION
R
4
IM E
Press the appropriate NUMBER keys to set the date, start/stop time and channel number. Press CH5� to set AM/PM, channel number and tape speed. Then press OK after AM/PM, channel number and tape speed settings. The next setting that can be set begins flashing. � Any information comprised of 1 digit (except the channel number) should have a "0" entered before it. � It is possible to set all information using the CH5� buttons. (In this case, press OK after each setting.)
OK
NOTE:
1 2 5 8 9 0 3 6
NUMBER
4 7
NUMBER "9"
If you are using a cable box, enter the cable box channel, not the channel to be recorded. The channel to be recorded must be selected on the cable box. (The cable box channel is the VCR's channel that displays the chennels received by the cable box.)
** You can record selected programs at the same time every weekday, or once a week. Before entering the month, press NUMBER key �8� (DAILY) or �9� (WEEKLY). Either "DAILY" or "WEEKLY" appears. Press again and "DAILY" or "WEEKLY" disappears.
"
T
Y
BR EMENU
2
N
4
3
q
5
K
6
MAKE CORRECTIONS
CH
MENU
5 6
9/ 6 SUN 12:00 PM 1:00 PM 40 SP
To change any of the settings, press OK until the item you want to change begins blinking. Then set as in step 4.
RETURN TO NORMAL SCREEN
EXAMPLE
If you program the VCR to timer record a show on September 6 on channel 40 from 12:00 noon to 1:00 PM in SP mode, the screen will look like this:
PROGRAM 1 DATE START STOP CHANNEL
Press MENU as many times as necessary. � Press just once to access the Auto Timer screen ( pg. 25).
ENGAGE TIMER MODE
PRESS NUMBER KEY(0-9) OR (5,�), THEN (OK) PRESS (MENU) TO END
7
Press TIMER. The VCR turns off automatically.
NOTES:
� To disengage the timer before recording starts, press TIMER again. Pressing once more re-engages it. � In case of a power failure after programming, the VCR�s memory backup keeps your selections for 10 minutes. � If you select "PROGRAM SET" without having set the date and time, an error message appears. Follow its instructions. � If you enter a start time that has already passed, ERROR appears on the screen and flashes. � Programs that start after midnight must have the next day�s date.
� After timer recording is completed, the VCR�s power goes off automatically. � You can program the timer while a regular recording is in progress; the on-screen menu will not be recorded. � If the end of tape is reached during timer recording, the cassette is automatically ejected. � When timer-recording cable channels received through a Cable Box, be sure to keep the Cable Box set to ON.
|
|
|
> |
|