PHILIPS HR2833
Manual de Servicio

SERVICE INSTRUCTION FOR PRINT-ASSY HR 2831/33 HR 2833 � turn the poti-gear to the MAX. left position. � mount the print-plate in the housing. � turn the speed-knob to the most right position for one time; the poti-gear is now right position. HR 2831 � turn the poti-gear to the MAX. left position. � remove the poti-gear. � mount the print-plate in the housing. � turn the speed-knob to pos. 2 put a screw driver to trim the speed to 1250 rpm.

MAX

poti-gear

SERVICE INSTRUCTION FOR REMOVING THE PULSE KNOB 1. put the speed knob to the most left position. 2. take a small screw driver and press it between speed knob and pulse knob.

3. turn the screw driver to pull the knob a little bit out of the power unit (a), set the screw driver deeper into the created hole (b) and lift it (c).

4. pull the pulse knob out of the speed knob.

b a c