PHILIPS HR2061/55
Manual de Usuario

1

EnglisH

Never let the mill run for more than 30 seconds without interruption.  When you have finished processing, set the control knob to 0.  To remove the mill from the motor unit, turn the mill anticlockwise. Citrus press (HR2069 only) HR2071/HR2063/HR2061: You can order the citrus press (type number HR2947) from your Philips dealer. Preparing the citrus press for use 1 Insert the coupling unit of the citrus press in the bottom of the juice jug (1). Turn the coupling unit clockwise until it snaps into position (2) (Fig. 14).  Place the sieve in the juice jug (1). Push down the sieve and turn it clockwise until it snaps into position (2) (Fig. 15).  Place the cone onto the driving shaft in the centre of the sieve (Fig. 16).  Place the citrus press on the motor unit and turn it clockwise until it locks into position. (Fig. 17) Using the citrus press 1 First set the control knob to speed 1 and then press the citrus fruit onto the cone.  Stop pressing from time to time to remove the pulp from the sieve. Do not exceed the level indication on the juice jug.  When you have finished processing, set the control knob to 0 and unplug the appliance.  Remove the juice jug with the sieve and cone still assembled by turning the juice jug anticlockwise. 5 Remove the cone and the sieve before you pour out the juice. Chopper (HR2069/HR2063 only) You can use the chopper to chop ingredients such as onions, meat, herbs, vegetables, fruit, chocolate, firm cheese, baby food and nuts. HR2071/HR2061: You can order the chopper (type number HR2939) from your Philips dealer. Do not use the chopper to mix liquids. Use the blender for this purpose. 1 Insert the coupling unit of the chopper into the bottom of the chopper bowl (1). Turn the coupling unit anticlockwise to fix it (2) (Fig. 18).  Place the chopper bowl (1) on the motor unit and turn it clockwise to fix it (2). (Fig. 19)  Place the chopper blade unit in the chopper bowl (Fig. 20).  Put the ingredients in the chopper bowl (Fig. 21). Note: See the chopper table at the end of this user manual for the recommended quantities and processing times. Do not exceed the maximum quantities indicated in the table. Tip: Precut large pieces of food into pieces of 1-2cm. 5 Put the lid on the chopper bowl (1) and turn it clockwise to fix it (2) (Fig. 22). Note: Make sure the lid is properly fixed before you switch on the appliance.