Maintenance
Replacing the Fuse
If the fuse is blown, check the power connection first and then replace the fuse. If the fuse blows again under normal conditions, the unit may be defective.
Removing the Unit
Use the supplied release keys when you need to remove the unit from the car. Insert the � TOP R ��and � TOP L ��of the release keys on the right and left position until it clicks respectively, to remove the unit.
Back of the unit
Warning
Use only a fuse with the specified amperage (10 A). Use of another type of fuse can result in a fire or unit damage.
Cleaning the Connectors
If the connectors of the unit and the front panel are contaminated, malfunctions may occur. Detach the front panel and clean the connectors with an alcohol dampened cotton swab as shown below. As shown in the figure below, push the plate spring firmly to remove the release keys.
Main unit
Back of the front panel
Notes
� Handle the release keys carefully to avoid injuring your fingers. � Keep the release keys in a safe place for future use.
Returning to the Initial Settings
When the reset button is pressed, the microcomputer of the unit returns to the initial settings. If the display window is not properly shown or the unit malfunctions, press the reset button with the point of a sharp object such as a ball-point pen.
