JVC HMHDS1U
Manual de Usuario

PLAYBACK FEATURES for HDD deck

EN

27

Live Memory Playback

Setting Time for Live Memory Playback

Equipped with a hard disk drive, this recorder allows information to be written to and read from the hard disk at high speeds. Taking advantage of this feature, you can temporarily record programs received with the tuner or from an externallyconnected equipment � CATV or DBS, and can watch them only a few seconds behind actual air time. In this recorder, viewing a program through HDD (not a recorded program) means you are always watching the program temporarily recorded on it. This feature enables you to reverse the program back to view any previous part of it � so called �Live Memory Playback�, which was impossible until now. To access �Live Memory Playback�, all that you have to do is to turn on the recorder and select the HDD deck. So, the temporary recording is started on the HDD deck. And, you can select the length of the time for temporary recording from off, 30 minutes, 1 hour, and 3 hours.

ACCESS MAIN MENU SCREEN

1 2

Press MENU. � If you want to stop the following procedure on its way, press MENU.

ACCESS HDD SET UP SCREEN
1) Press @# (or 23) to move the arrow to �HDD/VHS SET UP�, then press � (or �) or OK. 2) Press @# (or 23) to move the arrow to �HDD SET UP�, then press � (or �) or OK.
HDD/VHS SET UP FUNCTION SET UP

HDD SET UP

VHS SET UP 1

INITIAL SET UP

VHS SET UP 2

LIVE MEMORY

1 HR.

INDEX

MENU

SELECT OK END

SELECT WITH [�523] THEN PRESS [OK]

About �Live Memory Playback�

With a certain amount of space (for 30 minutes, 1 hour, and 3 hours) reserved on the hard disk, the recorder records broadcasts being received or signals input from an externally connected equipment. Even while you are reversing the program to review any previous part, the recorder continues recording the same program or externally-input signals. When the reserved amount of time (or space) runs out, the recorder overwrites the previous recordings on the hard disk, starting with the oldest one, repeatedly if necessary. After having recorded a certain number of programs, if you try to increase the amount of your reserved time on HDD, you may not be allowed to do so because of possible lack of available space, and the recorder will inform you of this by displaying a message on the screen.

SELECT LIVE MEMORY MODE

3

1) At the �LIVE HDD/VHS SET UP FUNCTION SET UP INITIAL SET UP MEMORY�, press OK. HDD SET UP VHS SET UP 1 VHS SET UP 2 2) Press %� (or 5�) to LIVE MEMORY 1 HR. OFF select the desired 30 MIN. 1 HR. mode, then press OK. 3 HR. a� Select �OFF� if you do not want to use SELECT WITH [�523] the Live Memory SELECT OK END THEN PRESS [OK] Playback. b� Select �30 MIN.� if you want to use the Live Memory Playback for up to 30 minutes.
INDEX MENU

About limitation on Live Memory Playback
Recording to perform Live Memory playback, which means the use of temporary recording on the hard disk, works for signals from built-in tuners, external tuners and externallyconnected equipment. This feature also works for copyprotected programs. The temporary recording for Live Memory is canceled in the following cases, and will start all over again when it is to resume. � When channels are changed � When the power is turned off � When the thumbnails are changed � When the setting for Live Memory playback is changed � When recording is started via the HDD deck or the VHS deck � When a recorded program is played back or deleted

c� Select �1 HR.� if you want to use the Live Memory Playback for up to an hour. d� Select �3 HR.� if you want to use the Live Memory Playback for up to 3 hours.

RETURN TO NORMAL SCREEN

4

Press MENU.

Start Live Memory Playback
You can start Live Memory Playback by pressing @ (or 2) or 1, then press PLAY. When you press @ (or 2) to start Live Memory Playback, the recorder will rewind the pictures to the point where Live Memory time counter shows �00� or �30� in its minutes� place (or to the beginning of the program), then start Live Memory Playback automatically. You can use various playback features during Live Memory Playback. (See pages 30 and 31.) � To stop Live Memory Playback, press STOP. The on-air screen resumes.