Now enter the key that has to be pressed to obtain an outside line (outside line access code). This is either number.
0
RECALL/R
7
, the R key or another
POSTLINE BY: R
FINE PHOTO BUSY TEL TEL/FAX EXT.
�
OK
Press OK.
CHECK ?
FINE PHOTO BUSY TEL
YES
TEL/FAX EXT.
OK
Press OK. Your machine will then check that the outside line can be obtained.
CHECKING...
FINE PHOTO BUSY TEL TEL/FAX EXT.
If the check is successful, the following message will appear briefly in the display:
CHECK OK
FINE PHOTO BUSY TEL TEL/FAX EXT.
If the check is unsuccessful, the following message will appear briefly in the display.
CHECK NOT OK
FINE PHOTO BUSY TEL TEL/FAX EXT.
You will be asked to repeat the entry. Change either the dial mode or the key for obtaining an outside line.
DIAL MODE: TONE
FINE PHOTO BUSY TEL TEL/FAX EXT.
2.6 Loading or removing the thermal paper
Loading the thermal paper Before you can receive or copy documents you must first load thermal paper into your fax machine. For this, your fax machine needs to be connected to the power supply. If the paper is finished or no paper roll is in your fax machine, the display will read: You can remove the rest of the old paper roll and insert a new one.
OUT OF PAPER
FINE PHOTO BUSY TEL TEL/FAX EXT.
Open the operation panel by gripping the edges on either side.
Then open the inner paper cover until it clicks into place.
