PRODUCT INFORMATION
Features : Memory Last measured temperature appears on the display after pressing the on/off button for at least 2 seconds. The buzzer sounds 3 times and the ºC symbol stops blinking. The thermometer may be immersed in disinfectant containing water for maximally one hour. The water temperature must be lower than 60 ºC. On display After 30 minutes Technical Data Power consumption Less than 60 micro-Watts, which means more than 3000 measurements with one battery. For this thermometer no spare parts will be available in the after sales period. When the product is defective, it has to be replaced. LCD display with 4.8 mm character height 32.00 ºC - 42.00 ºC Approximately 60 seconds Peak hold system Measurement is ready when the temperature does not change during 20 seconds. 0.1 ºC between 35.5 ºC and 42.0 ºC 0.2 ºC between 32.0 ºC and 35.5 ºC Button-cell 1.5 V type LR41 Sensor-tip: Stainless steel Housing parts and protective box:ABS p.t.o. p.t.o. p.t.o.
Measurement -readysignal Waterproof
Service
Display Measuring range Measuring time Measuring system Measurement ready
Battery low indication Automatic switch - off
The thermometer meets the Medical Device Directive 93/42/EEC for medical appliances
Accuracy
Battery Materials
Display informations Replacing the battery Cleaning instructions
Published by Philips Domestic Appliances and Personal Care
