|
Usuarios conectados
Actualmente hay 5916 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
3-1. Setup Menu
DISPLAY switch ON: Displays characters and messages indicating the video camera settings and operation status OFF: No character or marker display appears on the viewfinder screen MENU: The setup menu appears on the viewfinder screen MENU SELECT control Selects the menu item or setting value displayed on the viewfinder screen. MENU SELECT switch ENTER: Enters the page/item select mode, or enters the setting values CANCEL: Cancels the contents of a menu setting, or returns to the page select mode or TOP menu. n The TOP menu screen indicates the entire configuration of menu items. To display the TOP menu, set the DISPLAY switch to MENU (from OFF) while pushing up the MENU SELECT switch to ENTER. . Basic operation
1. Displaying the menu To display the Operation menu, set the DISPLAY switch to MENU. To display the other menus than the Operation menu, first of all, the TOP menu shall be displayed. To display the TOP menu, set the DISPLAY switch to MENU (from OFF) while pushing up the MENU SELECT switch to ENTER. Then turn the MENU SELECT control to move the � cursor to a menu item which you want and push up the MENU SELECT switch to ENTER. 2. To shift the page, turn the MENU SELECT control with a page scroll bar displayed at the top-right of the screen until the desired page is displayed and push up the MENU SELECT switch to ENTER. The menu enters the item select mode and the page scroll bar disappears. 3. To shift the item, turn the MENU SELECT control until the � cursor points the item to be set and push up the MENU SELECT switch to ENTER. 4. To change the value, turn the MENU SELECT control. You can change the values quickly by turning the MENU SELECT control fast. You can make very fine adjustments by turning the control slowly. By pushing up the MENU SELECT switch to ENTER, the setting is entered. 5. The menu is returned to the item select mode or page select mode every time the MENU SELECT switch is pushed down to CANCEL. 6. To exit from the setup menu, set the DISPLAY switch to OFF. . ROM version
Contents in the menu and factory settings may differ from the descriptions in this manual depending on the version of ROMs (IC24/SG-226, IC26/IF-569). In this section, an item under �Ver.� in the table shows a ROM version. If any version is given, it shows that the function for the item is added or changed, and the ROM with that version or higher version supports the function. If no version is given, it shows that every ROM version supports the function.
3-2 (E)
HDC-700A
|
|
|
> |
|