SONY HCDMD555
Manual de Servicio

4-19. HOW TO ASSEMBLE THE GEARS
3 Gear (Gear B)

A

Attach the gear so that radius of the gear agrees with that of "A" portion as shown in the figure.

1 Move the slider (U/D) in the direction of the arrow as far as it can go.

2 Gear (U/D slider)

4 Gear (Gear A)

Gear of the slider (U/D)

Gear (Gear B)

In line with this straight line

Attach the gear so that the gear engages with the bottom gear of the slider (U/D) as shown in the figure.

Attach the gear so that the gear is positioned in line with the gear (Gear B) as shown in the figure.

4-20. HOW TO ATTACH THE SLIDER (SELECTION)
6 Two screws (+PTP WHM 2.6) 2 Gear (chucking)

Rotary encoder
5 Washer 4 Compression spring 7 Insert the slider (selection) to "A" portion.

This portion must come into the groove of the rotary encoder.

A
3 Protrusion of slider (selection)

Gear (Chucking)
1 Rotary encoder

Aligning the marks

Insert the protrusion into the groove of the gear (chucking). Two marks must be aligned.

� 35 �