SONY HCDCP1
Manual de Servicio

TRAY
1 two screws (PTPWH2.6 � 7)

2 chucking yoke (K)

6 damper (S) 7 lock lever

4 Pull the tray. 8 Remove the tray.

A

5 claw

7 lock lever 3 Rotate the control cam in the direction of arrow A.

� SUB CHASSIS INSTALLATION
Note: Follow the assembly procedure in the numerical order given. 2 Install the drive gear with gear position as shown in figure.

gear
3 screw (PTPWH2.6 � 16)

5 two screws (PTPWH2.6 � 7)

front side

4 sub chassis

1 Install the control cam with gear position as shown in figure.

gear

front side

� 10 �