HUSQVARNA HA110
Manual de Usuario

WORKING TECHNIQUES
� Always wear heavy-duty gloves when repairing the cutting attachment. This is extremely sharp and can easily cause cuts. 2 Press the cutting unit against the hedge or some other �rm surface until the required angle is set.

� �

Store the machine out of reach of children. Use only original spare parts for repairs. 3 Tighten the knob.

Basic working techniques
� Work with a swinging action from the bottom upwards when trimming sides.

(HA 850)
� Undo the knob.

� � �

Adjust the throttle setting to suit the load. When trimming a hedge the engine should always face away from the hedge. Hold the machine as close to your body as possible to get the best balance. � Adjust the angle with the help of the handle on the cutting unit.

� � � Make sure that the tip does not touch the ground. Do not rush the work, but work steadily until all the branches have been cut back cleanly.

Tighten the knob.

Changing the hedge trimmer angle

(HA 110)
1 Undo the knob.

!

WARNING! Do not hold the cutting head when you adjust the angle. The blades are sharp and you could easily cut yourself.

English

�9