JVC GV-DS2E
Manual de Usuario

CAMCORDER ATTACHMENT
1

EN

11

Before attachment, make sure the camcorder's power is off.

1. OPEN COVER
Slide the Multi connector cover (MULTI) on the bottom of the camcorder in the direction of the arrow until you hear a click.

2. ATTACH
Attach the camcorder by aligning the mark on it with the one on the Video Capture Docking Station.

3. FIX
2 3
Mark

Slide the camcorder in the direction of the arrow.

4. LOCK
While holding the camcorder, slide the LOCK lever in the direction of the arrow.

To remove the camcorder . . . � press the RELEASE button. After the LOCK lever has been released, detach the camcorder.
LOCK lever RELEASE button
Lock !

NOTE : If it is impossible to slide the lock lever, repeat steps 2 and 3.

Charging a battery Installed in the Camcorder . . .
If you attach the camcorder with a battery installed to the Video Capture Docking Station, you can charge the battery. First make sure that the camcorder does not have a DC cord connected to it before attaching. Turn the camcorder's Power Dial to "OFF" then perform the following steps. 1. Connect the Video Capture Docking Station to the AC Power Adapter/Charger. �The Video Capture Docking Station does not use the camcorder's battery to function. Be sure to connect the AC Power Adapter/Charger exclusively for use with the camcorder. 2. Connect the power cord to an AC outlet. �The Docking Station's charger indicator begins (CHARGE) blinking to indicate that the charge has begun. When it stops blinking and lights steadily, the charge is complete. It takes approx. 2 hours to charge the battery fully.

Charger indicator

Core filter