JBL GT650P
Manual de Servicio

Technical Manual

SPECIFICATIONS
Max. Output Power: Continuous Output Power: Crossover Frequency: Inputs: Gain (@20W output): Input Impedance: High Level Input Low Level Input Current Consumption: @ Standby (max): @ Idle: @ Max. Output: Level Required to Turn On: (Line Level): (Speaker Level): ON to Standby:

GT650P
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
80 watts (40 x 2) 50 watts @<1% THD 80Hz - 250Hz (continuously variable) Speaker Level & Line Level 42 XXXXXXXXXXXXXXXXXXXXXXXX 40K ohms XXXXXXXXXXXXXXXXX 65K ohms XXXXXXXXXXXXXXXXXixXXXXXX 15mV XXXXXXXXXxxXXXXiXXXXX 0.4A XXXXXXXXXxxXXXXiXXXXXX 11A XXXXXXXXXXXXXXXXXXXXXXXX 6mV XXXXXXXXXXXXXXXXXXXX 35mV XXXXXXXXXXXXXXXXXXX 2.5 min.

ACOUSTIC & ELECTRICAL SPECIFICATIONS:
Low Frequency Transducer:

Design:

Impedance: Frequency Response:

XXXXXXXXXXXXXXXXXXXXXXXX Dual voice coil, high polymer XXXX laminate woofer cone. 2.3 ohm 50 - 250 Hz

(cont'd)

OPERATIONAL NOTES:
1. Red LED is ON at all times during normal operation. 2. Green LED will pulse ON with bass notes in music program only. 3. After 2.5 minutes of no signal input, unit will go into standby mode. xxBoth LED's will be OFF.

SYSTEM COMPONENTS:
Enclosure: Grille: Amplifier: Woofer:

#106023-1(Not For Sale) #111002-1BK #420011-2 #S6C170-27-SP (Not For Sale)

PACKAGE
Tie Down Strap #761083-2

Owner's Manual PI-179 Screws (4) #323016-1 Strap Brackets #761084-1 Stereo Phono (RCA) Cable #404650-1 Poly Bag

PHYSICAL SPECIFICATIONS:
Enclosure Dimensions: XXXXX Shipping Weight:

12-1/8 x 8-1/8 x 12-1/8 inches 308 x 206 x 308mm 11 1/2 lbs. (5.2 kg)

WARRANTY INFORMATION:
Refer to the Warranty Statement packed with each product.

WIRING DIAGRAM
DRIVER LOW FREQUENCY TRANSDUCER #S6C170-27A

GT650P
BLACK BLACK

Bubble Pack Bag
RED WITH BLACK STRIPE RED WITH BLACK STRIPE

AMPLIFIER ASSEMBLY #420011-2

Carton #960052-1

RED BLACK FUSE

4-8 )
JBL Consumer Products Inc., 80 Crossways Parks West, Woodbury, New York 11797

9-97

GT650P