JVC GR-DVJ70EG
Manual de Usuario

20

EN

RECORDING (Cont.)

Basic Recording
You should already have performed the necessary preparations ( pgs. 8 � 19). Set the Select Dial to �AUTO� and try recording that way before attempting to use more advanced features.

P

LA

Y OFF R EC
5S

VIEWFINDER
REC

STANDBY

RECORDING START/STOP BUTTON POWER LAMP
OFF

DURING RECORDING

VIEWFINDER
PAUSE

PL

AY

REC
5S

AUTO
FOCUS EXP.

SET

WB PRO

RECORD/STANDBY

NOTE:
Before starting recording, make sure you set the date and time ( pg. 11). Even if they don�t appear during recording, they are recorded onto the tape and can be displayed during playback ( pg. 45).

1 PULL OUT VIEWFINDER 2 TURN ON POWER

Align its mark with �STANDBY�. Set the Power Dial to �REC�. The power lamp comes on and RECORD/STANDBY mode is engaged. �If you don�t pull out the viewfinder, the power cannot be turned on.

5 END RECORDING

When you�re finished recording, press RECORDING START/STOP. Align the viewfinder�s mark with �CAMERA OFF�; the power lamp goes out and the lens cover closes automatically.
� When transporting, make sure the viewfinder is in this position. � Before turning the power on again, you must pull out the viewfinder.

3 SELECT OPERATION MODE
�In the �AUTO� mode, only Zoom (20x), Snapshot, 5S (if you change the setting in the System Menu, either 5SD or ANIMATION becomes available � see pgs. 18 � 19) and Self-Timer are available.

Set the Select Dial to �AUTO�.

NOTES:

4 START RECORDING

When �PAUSE� appears in the viewfinder, press RECORDING START/STOP. A beep signals the start of recording.

� If 5 minutes elapse in the RECORD/STANDBY mode, the power shuts off automatically to conserve energy. To turn the camcorder on again, set the Power Dial to �OFF�, then to �REC�. As long as you don�t take out the tape you were using or play it back, you can continue recording from where you left off with no noticeable break. � RECORD/STANDBY means that a tape is loaded and the camcorder is ready to record. � If RECORD/STANDBY (Pause) is engaged for 5 minutes, the Stop mode is automatically activated to protect the heads. � If you start a recording on a blank portion of the tape, or onto a brand new tape, recording starts approximately 3-4 seconds after you press RECORDING START/STOP. In order to record the entire scene or sequence, make sure to start recording slightly in advance.