JVC GRD90UB
Manual de Servicio

2.1.5.3

[ 4 ] REEL DISK ASSY(SUP) [ 5 ] REEL DISK ASSY(TU) [ 6 ] REEL COVER ASSY

(W4) NOTE 4 [4] 8 (S6a) (W5a) NOTE 5a [5] (W5b) NOTE 5b (W6) 10 (S6b) 9 (S6a)

NOTE 4: Be careful not to attach the REEL DISK wrongly. The Supply side can be identified by the white color at the center. NOTE 5a: Be careful not to attach the REEL DISK wrongly. The Take-up side can be identified by the black color at the center. NOTE 5b The washer is inserted under the REEL DISK. Be carefull not to lose the washer. Two washers are inserted under the REEL DISK in some products manufactured earlier, but one washer is inserted in the products manufactured recently and in the future. See the parts list, and use the parts written in the parts list. NOTE 6: Perform the following steps for mounting. (1) Align the hole with the pin. (2) Attach the [17] PINCH ROLLER ARM FINAL ASSY by aligning the positions. (3) Attach the SLIDE DECK ASSY (POINT[A]) by aligning the positions. (4) Check that the parts below them are located in the correct positions. (5) Tighten the 2 screws. (6) Tighten the screw. (7) Attach the 1 SLIT WASHER parts.
NOTE 4, 5 NOTE 6
(3) (5) (2),(6)

[6] NOTE 6 [ 17 ]

Fig.2-1-16

REEL DISK ASSY
WHITE BLACK

[A] (4)
SUP TU

(1), (7)

2-8 (No.86700)