|
No hay comentarios de productos.
GR-209
8. PANEL FACILITIES AND SPECIFICATIONS
� FRONT PANEL FACILITIES
3
Left channel Equalizer indicators
Right channel Equalizer indicators
Equalizer ON indicator
209
STANDBY/ON
STANDBY ON
1
1 STANDBY/ON switch (STANDBY / ON) When this switch is set to the ON position, power is supplied to the unit�s main circuits (Equalizer indicators lights).
2
3 Equalizer controls These are equalizer controls for the bands 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.4 kHz, 6 kHz and 15 kHz. When the equalizer button has been set to ON, these controls may be adjusted. When a control is raised upwards from the �0� position, the frequency band corresponding to that control will be emphasized; when the controls is lowered, the frequency band will be attenuated. These controls can be used independently for right and left channels.
NOTE: Even when performing playback without using the functions of this component, be sure that its STANDBY/ON switch is ON. If the STANDBY/ON switch is STANDBY, no sound will be produced from the speakers.
2 EQUALIZER button (EQUALIZER OFF / ON) When this button is pressed, the equalizer ON indicator lights and its functions become operative. When pressed once again, this indicator go out and the unit�s functions are turned OFF, Use this button in the following manner: ON: When using the equalizer to add sound compensation while performing mixing operations with program sources (FM broadcasts, CD play, tape playback, etc.). OFF: When not using the equalizer, but playing back or recording program sources without compensation.
NOTE: In order to protect your speakers from damage resulting from excessively large inputs, whenever augmenting highfrequency sound over a wide range, be sure not to raise your amplifier�s sound volume too high.
13
|
