TEAC GR-10I
Manual de Usuario

Listening to the Radio
Selecting stations which cannot be tuned automatically (manual selection) When the TUNING/MULTI JOG rotary knob is turned, or when the Skip button of the remote control unit is pressed momentarily, the frequency changes by a fixed step. Turn the TUNING/MULTI JOG rotary knob (or press the Skip button of the remote control unit) repeatedly until the station you want to listen to is found.

Preset Tuning
You can program 10 FM & 10 AM channel presets.
1 Tune in a station you want to listen to (see steps 1 to 3 on page 18). 2 Press the MEMORY button.

How to select preset stations
1 To select FM or AM, press the TUNER

(FM/AM) button.

12

3

1 Press the TUNER (FM/AM) button.

2 Press the PRESET button repeatedly

until the desired preset station is found.
3 Within 5 seconds, select a preset

channel to store the station using the
2 To select FM or AM, press the TUNER

PRESET button.

(FM/AM) button again.

3 Select the station you want to listen

If the reception is poor For the best reception, rotate the FM or the AM antenna until you get stations clearly.

4 Within 5 seconds, press the MEMORY

to (auto selection).

button.

Hold down the Skip button of the remote control unit for more than 2 seconds and release it when the frequency display begins to change. When a station is tuned in, the tuning process will stop automatically. < To stop the auto selection, press the Skip button (or slightly turn the TUNING/MULTI JOG rotary knob of the main unit). 18

To store more stations, repeat steps 1 to 4.

19