JVC GD-V500PZU
Manual de Usuario

PICTURE Adjustments

SET UP for Input Signals
Select to match the signals from the source connected to the COMPONENT/RGB input terminals.

COMPONENT/RGB IN SELECT
(1) �COLOR� , �TINT� and �SHARPNESS� Selects the proper brightness and
Less More and �PC� input signal modes. density for the room.

Item Effect Adjustments Notes:

PICTURE settings cannot be adjusted for �RGB� BRIGHTNESS Y, PB, PR signals �COMPONENT�
such R, G, B, HD, VD signals �RGB� as night scenes and black hair. COLOR, TINT, SHARPNESS) for Darker Brighter Adjusts slightly to a lighter color. each PICTURE menu. Adjusts for easier viewing of dark pictures (2) You can change the level of each function (CONTRAST, BRIGHTNESS,

SET UP
Less More (3) The setting details for normal,

1
COLOR
dynamic and cinema respectively are Press to display the SET UP menu screen. memorized separately each input TINT Adjust for nice skin color. (NTSC only) Displays a sharp image. INPUT
Less More Press to select the �COMPONENT/RGB IN Reddish Greenish mode (VIDEO, COMPONENT, RGB

and PC).

(4) The �TINT� setting can be adjusted for

2 SELECT�. NTSC signal only.
SURROUND

SHARPNESS

Note: There is little change when PICTURE is increased with a bright picture or reduced with a dark picture.
N R SET UP

Press to select the desired mode.
VOL

COMPONENT/RGB-IN SELECT

ADVANCED SETTINGS
Adjusts the dark shades of the image in gradation. RETURN
PICTURE SOUND SET UP Less More

RGB

OSD LANGUAGE ENGLISH ( US ) Item Effect Details

SIGNAL

BLACK

EXTENSION

SELECT

PICTURE POS. /SIZE ASPECT

COMPONENT RGB

Less More

W/B HIGH B Adjusts the white balance for light blue areas. R
Less More

Press to exit from adjust mode.

W/B LOW R Adjusts the white balance for dark red areas.

Adjusting unnatural video images (3D Y/C FILTER)
W/B LOW B Adjusts the white balance for dark blue areas.
Less More

Less More

Select the SIGNAL from the �SET UP� menu during VIDEO (S-VIDEO) input signal

GAMMA 2.0 2.2 2.5 mode. (�SIGNAL [VIDEO]� menu is displayed.)
Down Up COMPONENT/RGB-IN SELECT

SET UP

Press to select the �3D Y/C FILTER (NTSC)� RGB

(1) Carry out �W/B� adjustment as follows. A Adjust the white balance of the bright sections using the �W/B HIGH R� and �W/B HIGH B� settings. RETURN B Adjust white balance of dark sections using the R� and �W/B LOW B� settings. C Repeat steps A and B to adjust. Steps A and B affect other�s settings, so repeat each step in turn to make the adjustment. Press (store) button (2) The adjustment values are memorized separately for each input mode (VIDEO, COMPONENT, RGB and PC).
R 3D Y/C FILTER ( NTSC ) ON

OSD LANGUAGE ENGLISH ( US ) Notes:

SIGNAL

Press to set ON/OFF.

SELECT

SIGNAL VIDEO (3) The range values should be used as an adjustment reference. [ ]

Helpful Hint ( / Normalization) NORMALIZE AUTO ( 4:3 ) NORMAL
While the �ADVANCED SETTINGS� menu is displayed, if either the N button on the remote control is pressed at any SELECT time or the (ACTION button) is pressed during �NORMALIZE�, then all adjustment values are returned to the factory settings.

N Press to exit from adjust mode. COLOR SYSTEM AUTO

CHANGE RETURN

29 30

GD-V500PZU

18

W/B HIGH R Adjusts the white balance for light red areas.