PHILIPS FW-P78/30
Manual de Usuario

TIMER
5 Press CLOCK/TIMER to store the start time. � The timer is now set. � The TIMER remains on the display. � At the preset time, the timer will be activated. � The selected source will be played. To switch off the TIMER 1 Press and hold CLOCK/TIMER for more than 2 seconds. 2 Press � on the system to cancel the timer. � The timer is now switched off. � The display will show "OFF" and the TIMER disappears. To start the TIMER again (for the same preset time and source) 1 Press and hold CLOCK/TIMER for more than 2 seconds. 2 Press CLOCK/TIMER again to store the start time. � The timer is now on. � The TIMER appears on the display.

SLEEP TIMER
This feature allows you to select a length of time after which the system will switch to the standby mode automatically. 1 Press SLEEP TIMER on the remote control repeatedly to select a period of time. � The selections are as follows (time in minutes): 60 � 45 � 30 � 15 � OFF � 60 � � "SLEEP XX" or "OFF" will be displayed. "XX" is the time in minutes. 2 When you reach the desired length of time, stop pressing the SLEEP TIMER button. � After this amount of time passes, the system will switch to the standby mode. To switch off the Sleep Timer � Press SLEEP TIMER repeatedly until "OFF" is displayed, or press the STANDBY ON button.

Notes: � During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. � If the source selected is TUNER, the last tuned frequency will be switched on. � If the source selected is CD, playback will begin with the first track of the selected disc or program. If the CD trays are empty, TUNER will be selected instead. � If the source selected is TAPE, and if the preset time is reached during high speed dubbing, the TUNER will be selected instead. � The timer will not activate if a recording is in progress.

25

Untitled-2

25

6/8/01, 10:13 AM

3139 116 19782

English

Sleep Timer (only on remote control)