Preparations
� Setting TV Shape IMPORTANT! � Make sure you have completed all the necessary connections. (See Connections � Connecting TV set) Select the aspect ratio of the TV to be connected. 4:3 PS (Pan and Scan mode ) � If you have a conventional TV set and your DVD is not formatted for widescreen viewing, use this setting. A wide picture is displayed on the whole TV screen with a portion automatically cut off.
Step 3: Setting video preference
Turn on the TV set and set it to the correct Video-In channel. � You may go to channel 1 on your TV set, then press the channel button repeatedly until you see the Video In channel. � Or, you can use the TV remote control to select different video modes. � Or, set TV to channel 3 or 4 if you are using an RF modulator.
Language Video Audio Rating
4:3 LB (Letterbox mode ) � If you have a conventional TV set and your DVD is formatted for widescreen viewing, use this setting. A wide picture with bands displayed on the upper and lower portions of the TV screen.
TV Shape TV System Video out
4:3 LB Auto
S-VIDEO
4:3 PS 4:3 LB
16:9
1 2
In the disc mode, stop playback and press SET UP. Press 1/2/5/4 on the remote control to toggle through the functions and select your preferential option. � Move to Video and press OK or 4. � Move to one of the following and press OK.
16:9 (Wide screen mode) � If you have a widescreen TV set, use this setting (you must also set your widescreen TV to �full size�) available on a disc, then the disc�s own preference will be used.
Note: The format you select must be available on the disc. If it is not, the setting for TV Shape will not affect the picture during playback.
