Preparations
IMPORTANT! � Make sure to complete the preparation procedures before operating the system.
Step 2: Setting the TV set
IMPORTANT! � Make sure you have completed all the necessary connections.
Step 1: Inserting batteries into the remote control
3 1 2
1 2
Push the source switch on the front panel to DISC. Turn on the TV set and set to the correct VideoIn channel. You should see the blue Philips DVD background screen on the TV set. � You may go to channel 1 on your TV set, then press the channel down button repeatedly until you see the Video In channel. � Or, you can use the TV remote control to select different video modes. Selecting the color system that matches your TV set This DVD Mini Hi-Fi System is compatible with both NTSC and PAL. For the playback of a DVD disc on this DVD Mini Hi-Fi System, the color systems of the DVD, TV set and DVD Mini Hi-Fi System should match.
1 2 3
Open the battery compartment. Place two batteries (Type R06 or AA) in the compartment with the correct polarity as indicated by �+� and ��� symbols. Close the cover. Using the remote control to operate the system
1 2
Point the remote control directly at the remote sensor (IR) on the front panel. Select the source you wish to control by pushing the source switch on the front panel to one of the source (for example DISC, TAPE, TUNER). Then select the desired function (for example 2;, I1 or ¡I ).
3
CAUTION! � Remove batteries if they are exhausted or will not be used for a long time. � Do not use old and new or different types of batteries in combination. � Batteries contain chemical substances, so they should be disposed of properly.
1 2
In disc mode ,press SYSTEM MENU. Press 1 / 2 / 5 / 4 keys on the remote control to select your preferred option. � Move to �Video Setup Page� and press 4. � Move to �TV Type� and press 2.
