Radio Reception
Notes: � If you attempt to store more than 40 preset radio stations, "PROGRAM FULL" will be displayed. � During programming, if no button is pressed within 20 seconds, the system will exit the Programme mode automatically.
Changing Tuning Grid (not available for
all versions) In North and South America, the frequency step between adjacent channels in the MW band is 10 kHz (9 kHz in some areas). The preset frequency step in the factory is 9 kHz. Changing the tuning grid will erase all previously stored preset radio stations.
E n g l i s h
Tuning to Preset Radio Stations
q Press à or ë (or Digits 0�9 on the remote control) to select the desired preset number. � The preset number, radio frequency, and waveband will appear on the display. For Recording, please refer to �Tape Operation/Recording�.
1 2
Disconnect the system from the AC power supply (pull out the AC power cord). While holding down TUNER and á on the system, reconnect the system to the AC power supply. � The display will show "GRID 9" or "GRID 10". Notes: � GRID 9 and GRID 10 indicate that the tuning grid is in step of 9 kHz and 10 kHz respectively. � The FM tuning grid also will be changed from 50 kHz to 100 kHz or vice versa.
Karaoke
2 3
MIC LEVEL
4
Press CD, TUNER, TAPE or AUX to select the source to be mixed and start playback. Adjust the volume level of the source with VOLUME control. Adjust the microphone volume with MIC LEVEL control. Note: � Keep the microphone away from the speakers to prevent howling.
Microphone Mixing
Connect a microphone (not supplied) to the system allowing you to sing along with the music source. Connect a microphone to the MIC jack. q Before connecting the microphone, set the MIC LEVEL to the minimum level to prevent howling sound. 20
pg 001-028/C870/21-Eng 20
For Recording, please refer to �Tape Operation/Recording�.
