SHARP FU-60SE-S
Manual de Servicio

FU-60SE-S

FOR EFFECTIVELY USING THIS PRODUCT
HOW THE AIR PURIFIER WORKS
The air purifier uses the internal fan to intake the air in the room through the intake port and discharges the air through the exhaust port after cleaning the air is passed through the deodorizing filter (Active carbon filter) and dust collection filter (HEPA filter). The unit then repeats this process. Odor ingredients are removed by repeatedly passing them through the Deodorizing filter for gradual adsorption.(At this time, the dust collection filter also adsorbs odor ingredients.)

FOR UNDERSTANDING THE PRODUCT
Some of the odor ingredients absorbed by the filters become separated and are discharged through the air outlet as odor. Depending on the usage environment, this odor may become strong in several months and the air outletmay smell. In this case, replace the filters.

GUIDE FOR OPERATION
(1) ODOR SENSOR In addition to odor such as cigarette smoke and pet odor, the odor sensor also responds to the following. Insecticide, cosmetics, spray, alcohol. Sudden changes in temperature or humidity. When the unit is in automatic operation and cosmetics or the like are used in a closed room, it is normal for the sensor to respond by increasing the air flow. If this is not desirable, change the sensitivity of the sensor. (2) DUST SENSOR The dust sensor detects dust particles in room air, such as cigarette smoke and house dust. Compared with cigarette smoke, the amount of dust released when making your bed is so small that it may not be detected by the dust sensor. Therefore, the amount of dust seen with the eye may differ from the indication of the clean-sign lamp. (3) FILTER RESET BUTTON After replacing filters, make sure to connect the power plug to a wall outlet, and press the filter Reset button on the main unit or on the remote control. The "BEEP" sound indicates that the stored operating time has been reset. If the filter lamp is lit at that time, it will now go off. (4) SENSOR SENSITIVITY SWITCH The sensitivity of odor and dust sensors is adjustable. " Standard " is set by default. This setting is for normal use. Set to " High " if you feel the sensitivity is low.

4