|
No hay comentarios de productos.
Maintenance
A
Clean the unit only as recommended in the Operating Instructions.
Damage Requiring Service
Have the units serviced by a qualified service technician if: � The AC power cord or plug has been damaged � Foreign objects or liquid have gotten inside the unit � The unit has been exposed to rain or water � The unit does not seem to operate normally � The unit exhibits a marked change in performance � The unit has been dropped, or the cabinet has been damaged DO NOT ATTEMPT TO SERVICE THE UNIT YOURSELF. Servicing � The user should not attempt to service the appliance beyond that described in the operating instruction. All other servicing should be referred to qualified service personnel.
BACKUP FUNCTION � A
If the AC power supply is interrupted, the clock display goes off and the alarm setting is canceled. To back up the clock and alarm, insert a 6F22 battery in the battery compartment on the rear of the unit. � The backup battery is not for radio reception.
Note
B
1
The backup function lasts about 10 minutes. Set the clock again if 10 minutes passed after a power interruption.
Replacing the battery
Replace the battery with new one if the clock display flashes or the alarm timer does not work properly when you connect the AC power cord again.
Note on battery
� When you are not going to use the unit for a long period of time, remove the battery to prevent possible electrolyte leakage. � To prevent the risk of electrolyte leakage or explosions, never recharge the battery, apply heat to it, or take it apart.
SLEEP ALARM
2 3
2,3
SETTING THE CLOCK � B
1 Connect the AC power cord to a wall outlet a. The clock display begins flashing. 2 While holding down CLOCK, press HOUR to set the hour. 7:00 7:00 a.m. w7:00 7:00 p.m. 3 While holding down CLOCK, press MIN to set the minute. The clock starts running at �00� seconds. To display the seconds, press SLEEP while holding down ALARM. The seconds are displayed while the buttons are pressed. b The 1st digit of the minute c Seconds
|
