FPS-1000
EXPLODED VIEW
SERVICE NOTE
To adjust direction of rotatable tweeter: 1. Remove the (4) 10mm white Grille screws (Use the 2mm hex key supplied in the hardware). 2. Remove the grille 3. Depress the outer edge of the tweeter with your finger to rotate it to the desired position. 4. Replace the grille. To access the drivers or network: 1. Lay the loudspeaker face down on a padded surface. 2. Remove all (33) ³��� Black flat head screws from the back panel. 3. Lift the back panel up and off the enclosure. 4. Lift the Dacron filler carefully up and out of the enclosure, taking care not to dislodge gaskets or wires. Tweeter removal: 1. Follow steps 1-4 above. (To access the drivers or network) 2. Locate the 3-lobed retainer at the rear of the tweeter; dis lodge the prongs from the sealant and rotate the retainer CCW until free of the plastic cup. 3. Pull the tweeter up and out of the enclosure.
Back Panel (Not for Sale)
Passive Radiator 196849 Enclosure FPS-1000 (Not for Sale)
Screws (33) ³��" Black FHD
