SHARP FO-4450
Manual de Servicio

FO-4450U/FO-CS1

8Secure the plates with screws as shown. Use 6 mm screws for the

holes marked with �A�, and 10 mm screws for the holds marked with ��P�. Secure the screws in the order indicated by the numbers.

GAttach the support plate to the left side of the machine, inserting the

top edges of the plate under the machine housing. Make sure that the guides fit into the holes as shown. Secure the plate with screws as shown. Use 6 mm screws for the holes marked with �A�, and 10 mm screws for the holes marked with �P�. Secure the screws in the order indicated by the numbers. (Note that the top hole on the right does not require a screw.)

A4

A3

A3 P3

A4

A4 P4

A2

A1

H Attach the shorter cassette cover totop, thenside of the cassette, inthe left serting the tabs into the holes (first bottom).

9Replace the right side cover on the machine, inserting the tabs into

the holes. Attach the longer cassette cover to the right side of the cassette, inserting the tabs into the holes (first top, then bottom).

1

1

ISecure the cassette cover with two 10 mm screws.
2

2

FReplace the screws in the side cover on the machine.
Secure the cassette cover with two 10 mm screws.

P

P

J Replace the rear cover (replace the screw under the small cover on
the left side of the rear cover first, and then replace the small cover).
A

A A P

A

A P

P
A

P

A

1 � 10