Installing the Receiver in a Japanese Car This receiver is designed for easy installation in most popular Japanese cars that have �ISO� (sidebracket) mounting system. If you have questions, ask your Blaupunkt dealer. 1. Remove the vehicle�s �bezel� trim piece and the remove the existing radio. 2. Unscrew the bolts on each side of the receiver to remove the trim ring. Save the trim ring in case you ever want to install the receiver in another vehicle. 3. Use the vehicle�s own mounting hardware to attach the unit. 4. With the detachable face removed, reinstall the vehicle�s bezel. 5. Only after the bezel in reinstalled, attach the face.
max. M5x8
NISSAN
max. &M5x8
TOYOTA
max.
max. M5x8
M5x8
MAINTENANCE Removing the Receiver Insert the �release handles� into the holes in the panel on the left and right of the receiver and push them in until you hear a distinct snap, which indicates the side springs are unlocked. Pull the unit out using both handles. (See Fig. 3) Note: Handles that have snapped into place can only be removed after you have pulled the receiver out of the complement. Remember where you store the �release handles�.
Fig. 3
Fuse Replacement When replacing the fuse, be sure to use one with the correct amperage, which will be stated on the fuse case. Never use a fuse that has a stated amperage exceeding the one supplied for this receiver as this could cause malfunction and serious damage to the receiver.