ZANUSSI FLD1006
Manual de Usuario

Operating sequence
Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.

1. Place the laundry in the drum
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
P0450

C

4. Select the temperature
Turn the dial to the required setting.

90°

5. Select the required option(s) and the spin speed
50 4

1000

P0178

P0004

2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . If you wish to carry out the soak or a programme with prewash, pour detergent into the appropriate compartment marked .

6. Select the programme and start the machine
Turn the programme selector dial clockwise to the required programme and press the ON/OFF button : the mains on light comes on and the machine starts to operate.
9 0 0

3. Measure out the additives
If required, pour fabric softener into the compartment marked , and bleach into the compartment marked without exceeding the «MAX» mark.

A

P0451

P0414S

P0223s

P0222

36

0 0 5 6 5

800

750
C l
l