ZANUSSI FL808
Manual de Usuario

Operating sequence
Before the first wash we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.

4. Select the desired option(s)
Depress button speed or option if desired and select the spin or .

1. Place the laundry in the drum
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
90

5 Select the temperature
Turn the dial to the required setting.

M0045S
P0004

2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . If you wish to carry out the prewash, pour detergent into the appropriate compartment marked .

6. Select the programme and start the machine
Turn the programme selector dial clockwise to the required programme and press the ON/OFF button : the mains on light comes on and the machine starts to operate.
0 7 5 8 00

B

3. Measure out the additive
If required, pour fabric softener into the compartment marked , and bleach into the compartment marked without exceeding the «MAX» mark.
M0046S
P0080

C0075

C0076

11

0 4 5 0

700

650 6

0 0

ENGLISH