WHIRLPOOL FL 242/1 WP
Guía de consulta rápida

GB
CONSUMPTION DATA
Programme Water Energy Programme duration (min.) 120

(l) Cotton 95° C with pre-wash Cotton 95° C Cotton 60° C Synthetic 60° C Cotton short 40° C Synthetic 40° C Delicate 40° C Wool 40° C 1 80

(kWh) 2,00

2 2 3 4

70 70 60 65 60 80 80

1,80 1,20 0,90 0,70 0,60 0,60 0,60

110 110 85 75 75 70 65

PROGRAMME START
1. Plug in the appliance. 2. Turn on the water supply tap. 3. Press the �ON/OFF� button.

5 6

DOOR LOCK
The door locks automatically after the programme start until the end of the programme.

PROGRAMME END SELECTING THE PROGRAMME
1. Turn the programme selector knob clockwise to the desired programme. 2. Set the temperature knob to the desired temperature. � The programme sequence indicator is at �Stop�. 1. Press the �ON/OFF� button. 2. Cancel the special options by pressing the appropriate buttons. 3. Turn the water supply tap(s) off. 4. Wait for the door to unlock (about 2 minutes). 5. Open the door and unload the machine. Note: Do not fully close the door but leave it ajar to allow the drum to dry out.

PRESS THE DESIRED SPECIAL OPTION BUTTON
�Lightly soiled / Half load� button � Reduces water consumption, above all during the rinse. � Especially suitable for lightly soiled or small loads (reduce the detergent quantity). �Rinse hold / Spin delay� button � � � The laundry remains in the last rinse water without being spun, to avoid heavy creasing. Especially suitable for the �Synthetic� or �Delicate� programmes, if the laundry is not to be unloaded immediately after the end of the programme. Stopping �Rinse hold� Press the �Rinse hold� button again; the load will be spun according to the selected programme.

PROGRAMME RESELECTION
1. Press the �ON/OFF� button. 2. Select the new programme, temperature and relative options. 3. Press the �ON/OFF� button.

5019 100 00030