PIONEER FH-P8800UC
Manual de Servicio

FH-P8800

- Removing the upper block of the CD mech module
1. Remove the 4 screws and the connector. Then take out the CD Mechnism Module. (Not shown in the figure). 2. Remove the 7 screws and the Heat Sink. 3. Remove the 7 screws and the connector. Lift the CD section together with the Cassette Mechanism

Module upwards, and remove it.

Heat Sink

CD Section CD Power Unit

Cassette Mechanism

Audio Amp Unit - Removing the CD power unit
1. Remove the 3 screws. 2. Straighten the 4 hooks marked with an arrow. Remove the CD Power Unit. When connecting the Deck Unit (Cassette Mechanism Module) to the Audio Amp Unit, push the Deck Unit through the hole by hand to insert the connector.

CD Power Unit

Deck Unit (Cassette Mechanism Module)
84